Seeking Drupal Support for site hosted on GoDaddy

Looking to address 2+1 needs:
1) Ad-Hoc Support needs – I have a specific need that I have listed below. Looking for someone to take on this issue and possible other issues as the pop up.
2) Long term support and future design needs – The application of Drupal for the customer I am currently working with is a ‘clients only’ site where the customer has a public web site with a ‘clients only area’ that is to be logged into. It is crude, but just getting the job done. They will need to follow up this project with a project that will include renovating the entire web site (public and client only).
+1) I am an independent technology consultant that works with small and medium-sized businesses in the Midwest, several that need help in the area of web development. I hope to develop a relationship with a company that I can pass these opportunities along to. I am not looking for commissions or a piece of the action, just a company I can depend on that ‘can make me look good’. 🙂

Here is the specific ask:

I am using Godaddy and Drupal (7) and am attempting to send email through the SMTP module. I must have gotten lucky because the GoDaddy tech I got knew right out of the gate that the settings needed to be localhost, port 25, no encryption and no authentication.

I have included the settings in the SMTP module below.

The Godaddy tech also installed the php script on my site and was able to demonstrate that the site is sending email. I received the email just fine.

When I run the test from the SMTP module I get the following logged. Kinda appears as if it is working, but the GoDaddy tech said he was ‘not seeing it come through the queues’. I did try with the Queue checkbox on and off. I am also including what the logs in Drupal say after attempting to send.

Finally, I did run a test off the site where we have a registration page (as opposed to simply running a test). I have included the logs for that as well.

**********SMTP Module Settings*************

SMTP Module settings:
INSTALL OPTIONS
Turn this module on or off: ON

Turn on delivery of emails: ON

Send mail by queue: Have tried both, but currently NOT CHECKED
Retry sending mail on error.: Currently NOT CHECKED

SMTP SERVER SETTINGS
SMTP server: localhost
SMTP backup server:
SMTP port: 25
Use encrypted protocol: No

SMTP AUTHENTICATION
Username:
Password:

E-MAIL OPTIONS
E-mail from address: [email protected]
E-mail from name: yyy Web Site

Allow to send e-mails formatted as Html: NOT CHECKED

SMTP CLIENT SETTINGS
Hostname:
HELO:

SEND TEST E-MAIL
E-mail address to send a test e-mail to: have definitely tried this with a few different email addresses 🙂

DEBUGGING AND LOGGING
Logging: Log everything

**********Log from Test*************

• SMTP.module is active.
• The configuration options have been saved.
• SMTP.module is active.
• SMTP -> get_lines(): $data was “”
• SMTP -> get_lines(): $str is “220-a2plcpnl0744.prod.iad2.secureserver.net ESMTP Exim 4.87 #1 Sat, 07 Jan 2017 07:39:52 -0700 “
• SMTP -> get_lines(): $data was “220-a2plcpnl0744.prod.iad2.secureserver.net ESMTP Exim 4.87 #1 Sat, 07 Jan 2017 07:39:52 -0700 “
• SMTP -> get_lines(): $data was “220-a2plcpnl0744.prod.iad2.secureserver.net ESMTP Exim 4.87 #1 Sat, 07 Jan 2017 07:39:52 -0700 “
• SMTP -> get_lines(): $str is “220-We do not authorize the use of this system to transport unsolicited, “
• SMTP -> get_lines(): $data was “220-a2plcpnl0744.prod.iad2.secureserver.net ESMTP Exim 4.87 #1 Sat, 07 Jan 2017 07:39:52 -0700 220-We do not authorize the use of this system to transport unsolicited, “
• SMTP -> get_lines(): $data was “220-a2plcpnl0744.prod.iad2.secureserver.net ESMTP Exim 4.87 #1 Sat, 07 Jan 2017 07:39:52 -0700 220-We do not authorize the use of this system to transport unsolicited, “
• SMTP -> get_lines(): $str is “220 and/or bulk e-mail. “
• SMTP -> get_lines(): $data was “220-a2plcpnl0744.prod.iad2.secureserver.net ESMTP Exim 4.87 #1 Sat, 07 Jan 2017 07:39:52 -0700 220-We do not authorize the use of this system to transport unsolicited, 220 and/or bulk e-mail. “
• SMTP -> FROM SERVER: 220-a2plcpnl0744.prod.iad2.secureserver.net ESMTP Exim 4.87 #1 Sat, 07 Jan 2017 07:39:52 -0700 220-We do not authorize the use of this system to transport unsolicited, 220 and/or bulk e-mail.
• SMTP -> get_lines(): $data was “”
• SMTP -> get_lines(): $str is “250-a2plcpnl0744.prod.iad2.secureserver.net Hello host.yyy.com [127.0.0.1] “
• SMTP -> get_lines(): $data was “250-a2plcpnl0744.prod.iad2.secureserver.net Hello host.yyy.com [127.0.0.1] “
• SMTP -> get_lines(): $data was “250-a2plcpnl0744.prod.iad2.secureserver.net Hello host.yyy.com [127.0.0.1] “
• SMTP -> get_lines(): $str is “250-SIZE 52428800 “
• SMTP -> get_lines(): $data was “250-a2plcpnl0744.prod.iad2.secureserver.net Hello host.yyy.com [127.0.0.1] 250-SIZE 52428800 “
• SMTP -> get_lines(): $data was “250-a2plcpnl0744.prod.iad2.secureserver.net Hello host.yyy.com [127.0.0.1] 250-SIZE 52428800 “
• SMTP -> get_lines(): $str is “250-8BITMIME “
• SMTP -> get_lines(): $data was “250-a2plcpnl0744.prod.iad2.secureserver.net Hello host.yyy.com [127.0.0.1] 250-SIZE 52428800 250-8BITMIME “
• SMTP -> get_lines(): $data was “250-a2plcpnl0744.prod.iad2.secureserver.net Hello host.yyy.com [127.0.0.1] 250-SIZE 52428800 250-8BITMIME “
• SMTP -> get_lines(): $str is “250-PIPELINING “
• SMTP -> get_lines(): $data was “250-a2plcpnl0744.prod.iad2.secureserver.net Hello host.yyy.com [127.0.0.1] 250-SIZE 52428800 250-8BITMIME 250-PIPELINING “
• SMTP -> get_lines(): $data was “250-a2plcpnl0744.prod.iad2.secureserver.net Hello host.yyy.com [127.0.0.1] 250-SIZE 52428800 250-8BITMIME 250-PIPELINING “
• SMTP -> get_lines(): $str is “250-AUTH PLAIN LOGIN “
• SMTP -> get_lines(): $data was “250-a2plcpnl0744.prod.iad2.secureserver.net Hello host.yyy.com [127.0.0.1] 250-SIZE 52428800 250-8BITMIME 250-PIPELINING 250-AUTH PLAIN LOGIN “
• SMTP -> get_lines(): $data was “250-a2plcpnl0744.prod.iad2.secureserver.net Hello host.yyy.com [127.0.0.1] 250-SIZE 52428800 250-8BITMIME 250-PIPELINING 250-AUTH PLAIN LOGIN “
• SMTP -> get_lines(): $str is “250-STARTTLS “
• SMTP -> get_lines(): $data was “250-a2plcpnl0744.prod.iad2.secureserver.net Hello host.yyy.com [127.0.0.1] 250-SIZE 52428800 250-8BITMIME 250-PIPELINING 250-AUTH PLAIN LOGIN 250-STARTTLS “
• SMTP -> get_lines(): $data was “250-a2plcpnl0744.prod.iad2.secureserver.net Hello host.yyy.com [127.0.0.1] 250-SIZE 52428800 250-8BITMIME 250-PIPELINING 250-AUTH PLAIN LOGIN 250-STARTTLS “
• SMTP -> get_lines(): $str is “250 HELP “
• SMTP -> get_lines(): $data was “250-a2plcpnl0744.prod.iad2.secureserver.net Hello host.yyy.com [127.0.0.1] 250-SIZE 52428800 250-8BITMIME 250-PIPELINING 250-AUTH PLAIN LOGIN 250-STARTTLS 250 HELP “
• SMTP -> FROM SERVER: 250-a2plcpnl0744.prod.iad2.secureserver.net Hello host.yyy.com [127.0.0.1] 250-SIZE 52428800 250-8BITMIME 250-PIPELINING 250-AUTH PLAIN LOGIN 250-STARTTLS 250 HELP
• SMTP -> get_lines(): $data was “”
• SMTP -> get_lines(): $str is “250 OK “
• SMTP -> get_lines(): $data was “250 OK “
• SMTP -> FROM SERVER: 250 OK
• SMTP -> get_lines(): $data was “”
• SMTP -> get_lines(): $str is “250 Accepted “
• SMTP -> get_lines(): $data was “250 Accepted “
• SMTP -> FROM SERVER: 250 Accepted
• SMTP -> get_lines(): $data was “”
• SMTP -> get_lines(): $str is “354 Enter message, ending with “.” on a line by itself “
• SMTP -> get_lines(): $data was “354 Enter message, ending with “.” on a line by itself “
• SMTP -> FROM SERVER: 354 Enter message, ending with “.” on a line by itself
• SMTP -> get_lines(): $data was “”
• SMTP -> get_lines(): $str is “250 OK id=1cPs9w-000dkZ-N2 “
• SMTP -> get_lines(): $data was “250 OK id=1cPs9w-000dkZ-N2 “
• SMTP -> FROM SERVER: 250 OK id=1cPs9w-000dkZ-N2
• SMTP -> get_lines(): $data was “”
• SMTP -> get_lines(): $str is “221 a2plcpnl0744.prod.iad2.secureserver.net closing connection “
• SMTP -> get_lines(): $data was “221 a2plcpnl0744.prod.iad2.secureserver.net closing connection “
• SMTP -> FROM SERVER: @byemsg
• A test e-mail has been sent to [email protected]. You may want to check the logs for any error messages.

**********Information in Drupal Logs*************
TYPE smtp
DATE Saturday, January 7, 2017 – 08:39
USER [email protected]

LOCATION http://host.yyy.com/admin/config/system/smtp?render=overlay

REFERRER http://host.yyy.com/admin/config/system/smtp?render=overlay

MESSAGE Sent mail to: [email protected]
SEVERITY notice
HOSTNAME 66.172.214.105
OPERATIONS

**********Log from Registration form *************

SMTP -> get_lines(): $data was “”
SMTP -> get_lines(): $str is “220-a2plcpnl0744.prod.iad2.secureserver.net ESMTP Exim 4.87 #1 Sat, 07 Jan 2017 08:28:26 -0700 “
SMTP -> get_lines(): $data was “220-a2plcpnl0744.prod.iad2.secureserver.net ESMTP Exim 4.87 #1 Sat, 07 Jan 2017 08:28:26 -0700 “
SMTP -> get_lines(): $data was “220-a2plcpnl0744.prod.iad2.secureserver.net ESMTP Exim 4.87 #1 Sat, 07 Jan 2017 08:28:26 -0700 “
SMTP -> get_lines(): $str is “220-We do not authorize the use of this system to transport unsolicited, “
SMTP -> get_lines(): $data was “220-a2plcpnl0744.prod.iad2.secureserver.net ESMTP Exim 4.87 #1 Sat, 07 Jan 2017 08:28:26 -0700 220-We do not authorize the use of this system to transport unsolicited, “
SMTP -> get_lines(): $data was “220-a2plcpnl0744.prod.iad2.secureserver.net ESMTP Exim 4.87 #1 Sat, 07 Jan 2017 08:28:26 -0700 220-We do not authorize the use of this system to transport unsolicited, “
SMTP -> get_lines(): $str is “220 and/or bulk e-mail. “
SMTP -> get_lines(): $data was “220-a2plcpnl0744.prod.iad2.secureserver.net ESMTP Exim 4.87 #1 Sat, 07 Jan 2017 08:28:26 -0700 220-We do not authorize the use of this system to transport unsolicited, 220 and/or bulk e-mail. “
SMTP -> FROM SERVER: 220-a2plcpnl0744.prod.iad2.secureserver.net ESMTP Exim 4.87 #1 Sat, 07 Jan 2017 08:28:26 -0700 220-We do not authorize the use of this system to transport unsolicited, 220 and/or bulk e-mail.
SMTP -> get_lines(): $data was “”
SMTP -> get_lines(): $str is “250-a2plcpnl0744.prod.iad2.secureserver.net Hello host.yyy.com [127.0.0.1] “
SMTP -> get_lines(): $data was “250-a2plcpnl0744.prod.iad2.secureserver.net Hello host.yyy.com [127.0.0.1] “
SMTP -> get_lines(): $data was “250-a2plcpnl0744.prod.iad2.secureserver.net Hello host.yyy.com [127.0.0.1] “
SMTP -> get_lines(): $str is “250-SIZE 52428800 “
SMTP -> get_lines(): $data was “250-a2plcpnl0744.prod.iad2.secureserver.net Hello host.yyy.com [127.0.0.1] 250-SIZE 52428800 “
SMTP -> get_lines(): $data was “250-a2plcpnl0744.prod.iad2.secureserver.net Hello host.yyy.com [127.0.0.1] 250-SIZE 52428800 “
SMTP -> get_lines(): $str is “250-8BITMIME “
SMTP -> get_lines(): $data was “250-a2plcpnl0744.prod.iad2.secureserver.net Hello host.yyy.com [127.0.0.1] 250-SIZE 52428800 250-8BITMIME “
SMTP -> get_lines(): $data was “250-a2plcpnl0744.prod.iad2.secureserver.net Hello host.yyy.com [127.0.0.1] 250-SIZE 52428800 250-8BITMIME “
SMTP -> get_lines(): $str is “250-PIPELINING “
SMTP -> get_lines(): $data was “250-a2plcpnl0744.prod.iad2.secureserver.net Hello host.yyy.com [127.0.0.1] 250-SIZE 52428800 250-8BITMIME 250-PIPELINING “
SMTP -> get_lines(): $data was “250-a2plcpnl0744.prod.iad2.secureserver.net Hello host.yyy.com [127.0.0.1] 250-SIZE 52428800 250-8BITMIME 250-PIPELINING “
SMTP -> get_lines(): $str is “250-AUTH PLAIN LOGIN “
SMTP -> get_lines(): $data was “250-a2plcpnl0744.prod.iad2.secureserver.net Hello host.yyy.com [127.0.0.1] 250-SIZE 52428800 250-8BITMIME 250-PIPELINING 250-AUTH PLAIN LOGIN “
SMTP -> get_lines(): $data was “250-a2plcpnl0744.prod.iad2.secureserver.net Hello host.yyy.com [127.0.0.1] 250-SIZE 52428800 250-8BITMIME 250-PIPELINING 250-AUTH PLAIN LOGIN “
SMTP -> get_lines(): $str is “250-STARTTLS “
SMTP -> get_lines(): $data was “250-a2plcpnl0744.prod.iad2.secureserver.net Hello host.yyy.com [127.0.0.1] 250-SIZE 52428800 250-8BITMIME 250-PIPELINING 250-AUTH PLAIN LOGIN 250-STARTTLS “
SMTP -> get_lines(): $data was “250-a2plcpnl0744.prod.iad2.secureserver.net Hello host.yyy.com [127.0.0.1] 250-SIZE 52428800 250-8BITMIME 250-PIPELINING 250-AUTH PLAIN LOGIN 250-STARTTLS “
SMTP -> get_lines(): $str is “250 HELP “
SMTP -> get_lines(): $data was “250-a2plcpnl0744.prod.iad2.secureserver.net Hello host.yyy.com [127.0.0.1] 250-SIZE 52428800 250-8BITMIME 250-PIPELINING 250-AUTH PLAIN LOGIN 250-STARTTLS 250 HELP “
SMTP -> FROM SERVER: 250-a2plcpnl0744.prod.iad2.secureserver.net Hello host.yyy.com [127.0.0.1] 250-SIZE 52428800 250-8BITMIME 250-PIPELINING 250-AUTH PLAIN LOGIN 250-STARTTLS 250 HELP
SMTP -> get_lines(): $data was “”
SMTP -> get_lines(): $str is “250 OK “
SMTP -> get_lines(): $data was “250 OK “
SMTP -> FROM SERVER: 250 OK
SMTP -> get_lines(): $data was “”
SMTP -> get_lines(): $str is “250 Accepted “
SMTP -> get_lines(): $data was “250 Accepted “
SMTP -> FROM SERVER: 250 Accepted
SMTP -> get_lines(): $data was “”
SMTP -> get_lines(): $str is “354 Enter message, ending with “.” on a line by itself “
SMTP -> get_lines(): $data was “354 Enter message, ending with “.” on a line by itself “
SMTP -> FROM SERVER: 354 Enter message, ending with “.” on a line by itself
SMTP -> get_lines(): $data was “”
SMTP -> get_lines(): $str is “250 OK id=1cPsuw-001uuW-Fc “
SMTP -> get_lines(): $data was “250 OK id=1cPsuw-001uuW-Fc “
SMTP -> FROM SERVER: 250 OK id=1cPsuw-001uuW-Fc
SMTP -> get_lines(): $data was “”
SMTP -> get_lines(): $str is “221 a2plcpnl0744.prod.iad2.secureserver.net closing connection “
SMTP -> get_lines(): $data was “221 a2plcpnl0744.prod.iad2.secureserver.net closing connection “
SMTP -> FROM SERVER: @byemsg

Drupal version: 


Source: https://www.drupal.org/taxonomy/term/51/feed